Views:
1,356
Votes: 2
✅ Solution
Tags:
boot
18.04
kernel
performance
systemd
Link:
🔍 See Original Answer on Ask Ubuntu ⧉ 🔗
URL:
https://askubuntu.com/q/1164705
Title:
Long kernel load time
ID:
/2019/08/10/Long-kernel-load-time
Created:
August 10, 2019
Edited: August 10, 2019
Upload:
September 15, 2024
Layout: post
TOC:
false
Navigation: false
Copy to clipboard: false
How can I troubleshoot this?
The first step is to find out what PCI device is generating the error:
pcieport 0000:04:00.0: Refused to change power state, currently in D3
My system doesn’t have a 0000:04:00.0 but it does have 0000:03:00.0 so I would use:
$ cd /sys/bus/pci/devices/0000:03:00.0
$ ls -la
total 0
drwxr-xr-x 5 root root 0 Aug 8 17:15 .
drwxr-xr-x 8 root root 0 Aug 8 17:15 ..
drwxr-xr-x 3 root root 0 Aug 9 17:53 0000:03:00.0:pcie208
-rw-r--r-- 1 root root 4096 Aug 9 17:53 broken_parity_status
-r--r--r-- 1 root root 4096 Aug 8 17:15 class
-rw-r--r-- 1 root root 4096 Aug 8 17:15 config
-r--r--r-- 1 root root 4096 Aug 9 17:53 consistent_dma_mask_bits
-r--r--r-- 1 root root 4096 Aug 9 17:53 current_link_speed
-r--r--r-- 1 root root 4096 Aug 9 17:53 current_link_width
-rw-r--r-- 1 root root 4096 Aug 9 17:53 d3cold_allowed
-r--r--r-- 1 root root 4096 Aug 8 17:15 device
-r--r--r-- 1 root root 4096 Aug 9 17:53 dma_mask_bits
lrwxrwxrwx 1 root root 0 Aug 8 17:15 driver -> ../../../../../bus/pci/drivers/pcieport
-rw-r--r-- 1 root root 4096 Aug 9 17:53 driver_override
-rw-r--r-- 1 root root 4096 Aug 9 17:53 enable
-r--r--r-- 1 root root 4096 Aug 8 17:15 irq
-r--r--r-- 1 root root 4096 Aug 9 17:53 local_cpulist
-r--r--r-- 1 root root 4096 Aug 9 17:53 local_cpus
-r--r--r-- 1 root root 4096 Aug 9 17:53 max_link_speed
-r--r--r-- 1 root root 4096 Aug 9 17:53 max_link_width
-r--r--r-- 1 root root 4096 Aug 9 17:53 modalias
-rw-r--r-- 1 root root 4096 Aug 9 17:53 msi_bus
-rw-r--r-- 1 root root 4096 Aug 9 17:53 numa_node
drwxr-xr-x 3 root root 0 Aug 9 17:53 pci_bus
drwxr-xr-x 2 root root 0 Aug 8 17:15 power
--w--w---- 1 root root 4096 Aug 9 17:53 remove
--w--w---- 1 root root 4096 Aug 9 17:53 rescan
-r--r--r-- 1 root root 4096 Aug 8 17:15 resource
-r--r--r-- 1 root root 4096 Aug 9 17:53 revision
-r--r--r-- 1 root root 4096 Aug 9 17:53 secondary_bus_number
-r--r--r-- 1 root root 4096 Aug 9 17:53 subordinate_bus_number
lrwxrwxrwx 1 root root 0 Aug 9 17:53 subsystem -> ../../../../../bus/pci
-r--r--r-- 1 root root 4096 Aug 9 17:53 subsystem_device
-r--r--r-- 1 root root 4096 Aug 9 17:53 subsystem_vendor
-rw-r--r-- 1 root root 4096 Aug 9 17:53 uevent
-r--r--r-- 1 root root 4096 Aug 8 17:15 vendor
$ cat vendor
0x8086
$ cat device
0x1576
$ cat class
0x060400
$ cat max_link_speed
2.5 GT/s
$ cat max_link_width
4
$ lspci -n | tail -8
03:00.0 0604: 8086:1576
03:01.0 0604: 8086:1576
03:02.0 0604: 8086:1576
39:00.0 0c03: 8086:15b5
3b:00.0 0200: 1969:e0a1 (rev 10)
3c:00.0 0280: 168c:003e (rev 32)
3d:00.0 ff00: 10ec:5227 (rev 01)
3e:00.0 0108: 144d:a804
$ lspci | tail -8
03:00.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
03:01.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
03:02.0 PCI bridge: Intel Corporation DSL6340 Thunderbolt 3 Bridge [Alpine Ridge 2C 2015]
39:00.0 USB controller: Intel Corporation DSL6340 USB 3.1 Controller [Alpine Ridge]
3b:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
3c:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
3d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
3e:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
If my system had the error then it would be caused by the Thunderbolt subsystem and I might just start by unplugging my Thunderbolt DPI to HDMI adapter.
In your case replace 0000:03:00.0 with 0000:04:00.0 above. Adjust tail number of lines as necessary.
This is the first step in trouble shooting.
Credit: - Decoding PCI data and lspci output on Linux hosts
Solution: It was Intel SpeedStep located at 0000:04:00.0 and enabling it in BIOS removes 30 second boot delay.